该词条未找到_海词词典

您要查找的是不是：

Keywords hobbing cutter;blank;envelope curve;error of profile; 滚刀;齿坯;包络线;齿形误差;
Keywords hobbing cutter;gear shaping cutter;cutting process;simulation; 滚刀;插齿刀;切削过程;模拟;
Keywords hobbing cutter;tooth form error;regrinding precision;optimal way;objective function; 滚刀;齿形误差;重磨精度;优化方法;目标函数;
The curve-edged hobbing cutter is used in producing rectangular wing sanitary napkin. 曲线刃滚切刀是用来加工护翼卫生巾的专用刀具。
The paper suggests a new method of cutting involete spur on gear hobbing machine by hobbing cutter with double-disk. 介绍了一种用圆盘双排滚切刀在滚齿机上连续展成滚切渐开线直齿圆柱齿轮的新方法。
Keywords high torque;hobbing cutter;teeth; 高扭矩;滚刀;齿条;齿形;
The binding technique for hob cutter inserts is useful for small and middle tool works. 其中，关于滚刀刀片的粘结工艺对中小工具厂家有借鉴意义。
On the base,it also put forward the suggestion to correct the convex angle size of preshaving hob cutter. 在此基础上,提出了剃前滚刀凸角尺寸修改的建议。
In thes paper, a mathematical model of curve-edged hobbing cutter is developed, which provides a scientific basis for machining the hobbing cutter. 经过研究，建立了滚切刀曲线刃的数学模型，为该刀的加工提供了依据。
In this paper, a mathematical model of curve-edged hobbing cutter is developed, which provides a scientific basis for machining the hobbing cutter. 经过研究，建立了滚切刀曲线刃的数学模型，为该刀的加工提供了依据。
In this paper,a new methd about the design of triangular spline hob cutter with chamfer has been introduced. 具有倒角的三角花键滚刀的设计一直采用近似的方法。
Its innovation is clicked and lain in: In geometry parameter of the hobbing cutter, the diameter of reducing the hobbing cutter can im... 在重磨齿形精度方面，适当改变设计偏距，可以提高滚刀的重磨精度、增加重磨次数、延长滚刀的使用寿命。
This paper describes the research of selected material and technology of plasma arc hardfacing to make a new type hobbing cutter shearing slice of trans former silicon steel. 本文叙述了有关采用粉末等离子堆焊制造新型的剪切变压器硅钢片的滚剪刀的选材和工艺的研究。
Then the formulae for calculating machine tool adjustment parameters on hobbing are derived by the study of spatial meshing principle among hobbing cutter, ... 进而通过对滚刀、产形齿条及锥形齿轮三者之间空间几何关系的分析,从理论上阐明了锥形齿轮的滚齿加工原理并推导了机床调整参数的计算公式。
Type Zbar, circular shaping plate, line-press wheel, circular hobbing cutter, draw line cutter, rolling-wheel for sealing can, tensile concave die, punching cutter. 型杆，成园板，压线轮，圆滚刀，划线刀，封罐滚轮，拉伸凹膜冲裁刀，翻边缩径膜。
The design and calculation of triangular spline hobbing cutter is very complicated.Computer programs are programmed accordingly based on the calculation steps and formulas. 三角花键滚刀设计计算十分繁琐,把数据计算步骤与公式设计编制成计算机程序。
According to practical processing of cutting,the proper length of gear wheel hobbing cutter was given.The time,the direction and size of flee cutter were described. 根据实际的切削过程,给出了齿轮滚刀的合理长度,对窜刀时间,窜刀方向及窜刀尺寸进行了论述。
In this paper, it introduced the max. undercutting value of gear with pre-grinding hob cutter and the calculation of ground involute length. 本文介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。
Keywords Hobbing machine Large annulus Milling; 滚齿机;大型内齿圈;铣削;
Keywords Hob;Process optimizing;Raise accuracy; 滚刀;工艺改进;提高精度;